Varnish Applicator Bottle designed for dispensing small amounts of Cellire Varnish onto fly heads. The applicator bottle has a fine diameter tube which mean it can be used on the smallest of flies.
Please note the Varnish Applicator Bottle does not contain Varnish, this is supplied separately with a choice of Cellire Varnish - Clear, or Cellire Varnish Coloured
The Loon Water Based Head Cement System is fast penetrating and quick drying. No solvents or toxic vapours. When precision really matters, Loon has a system all laid out for you. With the applicator cap and needle of the Water-Based Head Cement System, an exact placement of the cement without inconvenient globs and spills is easily achieved.
The Loon Water Based Head Finish System is designed to build up a glossy head as well as bodies onto your fly. Fast penetrating, quick drying and odour-free water-based formula, there aren't any harmful solvents to contend with.
The Loon Water Based Head Finish coming with an applicator cap and needle, precision is easy.
The Loon Water Based Thinner is the ideal product when you realize that the years have hardened your Head Cement. The Water Based Thinner has a special wetting agent for Loon's Water-Based products, Loon WB Head Finish and WB Head Cement, making them as good as new.
Bug-Bond is a Multi-Purpose UV Cure Resin which has been put together with the 395nm UV torch in a kit designed primarily for fly tying as an easy to use replacement for epoxy, which can be messy and time consuming. It has been developed for use as a coating and is ideal for coating and doming applications. The optically clear and tack free formulation also makes this product suitable for fly tying, rod building and various other applications. Bug Bond has been designed to be tack-free and optically perfect when cured correctly.The kit includes - 1 x 20ml bottle of Bug-Bond Original UV Cured Resin (Picture shows two bottles, only one supplied)1 x 95nm UV (ultra violet) flash light (not including batteries)1 x Bug Bond Tip Kit
Bug-Bond is a Multi-Purpose UV Cure Resin which has been put together with the 395nm UV torch in a kit designed primarily for fly tying as an easy to use replacement for epoxy, which can be messy and time consuming. It has been developed for use as a coating and is ideal for coating and doming applications. The optically clear and tack free formulation also makes this product suitable for fly tying, rod building and various other applications.Bug Bond has been designed to be tack-free and optically perfect when cured correctly.
Bug Bond Uv Cure Resin Kit includes :
-1 x 20ml bottle of Bug-Bond Original UV Cured Resin
- 1 x 395nm UV (ultra violet) flash light. (Requires 3 AAA batteries (not included))
Note Tips if required sold separately.
BUG BOND Original - A clear UV resin for the fly tier that cures with a tack-free finish when cured correctly. This material is resistant to yellowing with age, has an element of flex which means that it doesn't shatter on impact, it is optically perfect and cures quickly (from 3.5 seconds). Original has a similar consistency to "runny honey" and is easy to manipulate. This is your primary tying material and an ideal introduction to UV cure resins... why settle for less. In addition to fly tying BUG-BOND™ Original has been used to repair rod rings (the BUG-BOND™ 9ft 9# ringed only in BUG-BOND™ Original without thread is over 12 months old and has accounted for in excess of 50 fish to 16lbs in weight). BUG-BOND™ Original has also been used successfully in braid to fly line connections as well as knot protection. We've also had reports of wader repair and one customer fixed a leaking electric kettle with it!!
BUG BOND Lite - A clear UV resin for the fly tier that cures with a tack-free finish when cured correctly. This material is resistant to yellowing with age, has an element of flex which means that it doesn't shatter on impact, it is optically perfect and cures quickly. Lite has a similar consistency to "a light oil" and although easy to manipulate it requires a little more time to get used to how fluid it is. This may be your secondary tying material. Lite is used for more specialist applications or for securing thread part way through a tie where a build-up of material is not required and it has to be appreciated that ultra-thin coats of material may require more curing depending on the surface it is applied to.
BUG-BOND Tip Kit - this is kit includes a replacement bottle top with stopper and 5 taper tips that allows BUG-BOND™ to be dispensed precisely. The tips can be reused IF they are not exposed to UV light and kept in a sealed bag until the next time. IF stray UV cures the material in the top of the tip then usually a quick snip of the tip with a pair of tying scissors will give you a tip that you can continue using.
Bug Bond Multi-UV LED light - this is Bug Bond entry level light to enable curing of BUG-BOND™. It will cure BUG-BOND™ in most applications and was the light that was used to construct the BUG-BOND™ 9' 9# fly rod. This light is built to a price to allow those on a limited budget to access the benefits of BUG-BOND™. The light is powered by 3 AAA batteries, batteries are not included. It is critical that batteries are at peak performance for consistent curing and we recommend NiMh rechargeable batteries 3 AAA (not included)
Bug Bond Professional UV curing light - is a single emitter UV light that will appeal to the discerning fly tier. This is possibly the sleekest, smartest, smallest and cheapest to run UV light for curing UV cure resin available. It uses a single AA power cell. Tests have been conducted using NiMH rechargeable batteries and excellent results have been achieved. It will work equally as well with alkaline batteries if required. The casing is constructed of aircraft grade aluminium and anodised to a Type III specification and weighs in at a measly 74g including battery. The ability to power a high quality light with a readily available and inexpensive power cell in most countries will give customers outside the UK and those who travel the confidence that they can cure BUG-BOND™ wherever they might be on the globe! Link this with the fact that most rechargeable packs of AA batteries are sold in units of 4 batteries this will provide the fly-tier with an almost constant supply of UV light that will cure BUG-BOND™. Batteries are NOT included.
Bug Bond™ Professional UV Light Mains Footswitch Conversion, if you have already invested in the Bug Bond Professional UV Light - this conversion kit will effectively replace the finger switch and battery on the torch with a momentary footswitch, of which a power supply and torch adapter is attached.Note: Picture shows torch for illustration purposes - no torch supplied with this item.
Bug Bond™ Professional UV Light & Footswitch Conversion Kit, this kit includes the full conversion kit (momentary footswitch, power supply unit, torch adapter) plus the Bug Bond Professional UV Light. This is the full, conventional Professional UV light and features the traditional switch and battery port, so you can still take your UV Light with you in your portable tying kit.
Bug-Bond™ Professional UV Light, Kit and Footswitch Conversion, this kit which delivers everything you need in one package, includes the Professional UV Light, the Mains footswitch conversion kit (momentary footswitch, power supply unit, torch adapter), one bottle of Original Bug Bond UV Resin, and one set of Plastic tips.
Floo Gloo - A flexible clear floo gloo coating for flies and feathers. Simply coat with flue glue allow to dry and you have a welded wing or hackle point that looks the same but will not split.
Unitit Thinners - The product to use when you need to thin or slow down Veniard Cellire or Floo Gloo and / or cleaning brushes.
Unitit Thinners comes in a 15ml bottle.
Cellire Varnish - Top Seller - the original and best head cement.
Cellire Varnish 15 ml bottle & available in 5 colours including clear.
UV Reflective Coating from Veniard, it seems anything UV in the fly tying world is highly fashionable with sales of all UV products increasing year on year, and it really does seem fish are highly attracted! Veniard UV Reflective Coating is a new product of which is highly versatile, its brilliant for adding UV to your flies, just add a small dab to your fly and it will light up under UV light.