Err

CONTACT:
01933 388281
Currency :
Peak C CLAMP

Peak C CLAMP

Peak Fishing
(Code: 4870)
£ 56.27
(-15.00%) £ 47.83
-15%
Shopping Satisfaction
1 In Stock

Peak C CLAMP gives a compatible fly-tying vice a firm, edge-mounted position without taking up the bench space of a free-standing pedestal. Its carefully guided jaws are designed to tighten without twisting the clamping pad against the worktop.

Peak C CLAMP for Fly Tying

is a substantial clamp for a dependable tying position, at home on the usual tying desk or a temporary table. Two guide pins keep the clamping faces parallel, while the shaped upper face helps the assembly sit securely against the bench edge. Available from troutcatchers, with the full PEAK accessories range to explore as your set-up develops.

Peak C CLAMP Key Features and Benefits

  • Fits vice stems measuring 3/8 inch (9.5 mm) in diameter.
  • Reversible lower jaw accommodates suitable table thicknesses from 11/16 to 2¼ inches (about 17.5–57 mm).
  • Two precision guide pins keep the clamping faces parallel as the clamp is tightened.
  • Non-rotating clamping contact helps prevent the vice moving sideways and reduces marking of the bench surface.
  • Shaped gripping face sits neatly against the edge of the tabletop; a mounting point also accepts the PEAK Accessory Shaft.

Top Tips for Using Peak C CLAMP

  • Check the tabletop thickness and vice-stem diameter before mounting.
  • Seat the shaped upper face fully against the edge, then tighten the clamp until the vice feels steady.
  • If you prefer keeping tools off the vice stem, add the separate PEAK Accessory Shaft to the clamp.

Peak C CLAMP Practical Fly-Tying Applications

  • Make a regular tying bench more spacious by using an edge-mounted vice.
  • Take a compatible vice to club meetings or classes where a suitable table edge is available.
  • Add a light or tool organiser beside the vice using the optional accessory shaft.

Peak C CLAMP Frequently Asked Questions

Which vice stems fit the C-clamp?

The clamp accepts 3/8-inch (9.5 mm) stems, including the PEAK Rotary Vice stem.

What table thickness will it accommodate?

The lower jaw can be reversed to clamp suitable surfaces from approximately 11/16 to 2¼ inches (17.5–57 mm) thick.

Can I mount accessories on it?

Yes. The clamp accepts the separately available PEAK Accessory Shaft, giving you another place to mount compatible 3/8-inch accessories.

Useful PEAK Accessories to Compare

You may also find the PEAK Accessory Shaft, PEAK Riser useful alongside this accessory, depending on how you like to arrange your tying bench. Each item is available separately.

Customer reviews
Shopping Satisfaction
 5/5
I read somewhere that you could remove wheel bearings with this "bad boy" - I bought the pedestal and C-Clamp for different setups. This even has the slot for the accessory pole. Again very clever design and awesome build quality.
Brian B.
Related Items