Err

CONTACT:
01933 388281
Currency :

Tube Liner

Veniard
(Code: 374)
£ 1.77
(-15.00%) £ 1.50
-15%
Shopping Satisfaction
8 In Stock

Tube Liner from Veniard is fine polythene tubing for lining compatible metal tube flies. Its 1.5 mm outside diameter (OD) and 0.5 mm inside diameter (ID) provide a smooth passage for the leader, while the ends can be gently heated to form a neat mushroom-shaped retaining collar if required.

Veniard Tube Liner for Fly Tying

– A good liner helps keep the leader away from the edges of brass and aluminium tube bodies. Cut the liner to suit your fly, check the fit before tying and form a small collar at the exposed end if required. At troutcatchers, you can also find Veniard Bottle Tubes and Veniard Super Slim Bottle Tubes for compatible tube-fly dressings.

Tube Liner Key Features and Benefits

  • Outside diameter (OD): 1.5 mm – the full width across the outside of the tubing.
  • Inside diameter (ID): 0.5 mm – the opening through which the leader passes.
  • Wall thickness: Approximately 0.5 mm on each side, calculated from the diameters.
  • Polythene construction: Suitable for gently heat-forming a mushroom-shaped collar at the end.
  • Protective lining: Helps prevent the leader from rubbing against the edges of a compatible metal tube.
  • Cut to length: Supplied as approximately 40 cm of tubing per packet.

Tube Liner Top Tips

  • Check the fit first: Make sure the 1.5 mm outside diameter fits the bore of your chosen fly tying tube.
  • Allow for a collar: Leave a little liner protruding if you want to form a mushroomed end.
  • Heat gently: Bring the exposed tip close to a lighter flame, rather than placing it directly in the flame. The softened polythene can flare to form a small retaining collar.
  • Keep the bore clear: Avoid overheating, then let the liner cool and pass a length of leader through to check for obstructions or rough edges.
  • Run a spare length of leader through the finished fly to check the passage before fishing.

Tube Liner Fly Patterns and Uses

  • Salmon tube flies: Line suitable metal tube bodies beneath traditional or modern dressings.
  • Sea-trout tubes: Provide a smooth internal passage through shorter metal tube flies.
  • Scandinavian hairwings: Finish compatible tube bodies neatly beneath slim hairwing patterns.

Tube Liner Frequently Asked Questions Tube Liner



Is the outside diameter 1.5 mm?
Yes. The outside diameter (OD) is 1.5 mm. The hollow centre has an inside diameter (ID) of 0.5 mm.


Will the end mushroom when heated?
Yes. The polythene can be gently heat-formed into a small mushroom-shaped collar. Use careful, indirect heat near a lighter flame and avoid melting the bore closed.


Will it fit every fly tying tube?
Not necessarily. Tube sizes vary, so check that the liner's 1.5 mm outside diameter is suitable for the particular tube you are using.


How much tubing is supplied?
Approximately 40 cm of liner tubing per packet.


Are the tubes and hooks included?

No. This is polythene liner tubing only; outer tubes and trailing hooks such as Kamasan Tube Fly Hooks B990 are sold separately.
Customer reviews
Shopping Satisfaction
 5/5
Great item
Great item i would recomend to any person who ties tube flys
.
Thomas Review collected by SoapBox