Err

CONTACT:
01933 388281
Currency :

Bug-Bond Tip-Kit

Bug Bond
(Code: 3188)
£ 4.97
(-15.00%) £ 4.22
-15%
Shopping Satisfaction
11 In Stock

Bug-Bond Tip-Kit Good UV resin work is often about where the drop lands, not how much material you own. A narrow applicator makes it easier to keep a small head tidy and avoid coating hackles unnecessarily.

Bug-Bond Tip-Kit for Fly Tying

: The replacement bottle top and five tapered tips let you place Bug Bond resin accurately without flooding a small fly head. Keep applicators free of uncured resin and away from UV exposure between uses. troutcatchers also sells Bug Bond Original for shaping domed heads and Bug Bond Lite for fine coatings.

Key Features and Benefits – Bug-Bond Tip-Kit

  • Replacement cap with stopper plus five tapered application tips.
  • Designed to place UV resin accurately on small fly components.
  • Helps reduce waste caused by an oversized drop from a standard bottle opening.
  • Resin and curing torch are not included.

Using at the Bench – Bug-Bond Tip-Kit

  • After dispensing, wipe away uncured resin from the nozzle with a lint-free tissue before it is exposed to daylight or a UV torch.
  • Store clean, removable tips in a sealed, lightproof bag. If only the very end becomes blocked with cured resin, a careful short trim can reopen the nozzle; replace a tip with a deeper blockage.
  • Keep the bottle capped when not in use. Do not direct a UV torch towards stored tips or attempt to dissolve cured resin with an unapproved solvent.

Practical Applications – Bug-Bond Tip-Kit

  • Buzzer heads: lay down a narrow bead without flooding the cheeks.
  • Nymph wing cases: trace a controlled resin edge around the prepared shellback.
  • Streamers: apply small drops where artificial eyes meet the head.

Frequently Asked Questions – Bug-Bond Tip-Kit

Does this include resin?

No. The kit supplies the applicator top and five taper tips; resin is separate.

Can the tips be reused?

Yes. Wipe uncured resin from the nozzle straight after use and store the tips away from UV light in a sealed bag. A small blockage of cured resin right at the opening can sometimes be trimmed away carefully with sharp tying scissors. If the blockage is deeper, replace the tip rather than forcing it.

Which products are compatible?

Use with suitable Bug Bond Original or Bug Bond Lite bottles, and cure with an appropriate UV light such as the Veniard professional UV curing torch.

Customer reviews
Shopping Satisfaction
 5/5
As above.
Geoffrey A.
Shopping Satisfaction
 5/5
Fits bottles , you do need to double check for tightness on bottle , eg check no air is getting in or out
Again a simple instruction leaflet for first time buyers/users would have been useful.
David M.
Shopping Satisfaction
 5/5
Avery good kit.
RK S.
Shopping Satisfaction
 5/5
Got these thinking they would fit my bottle of BB but as my old one is class they didn't.
Christopher J.
Shopping Satisfaction
 5/5
Very helpful for applying the resin.
Alastair A.
Shopping Satisfaction
 5/5
Not yet tried, but hopeful.
John D.
Shopping Satisfaction
 5/5
Very good for applying a small amount.
Graham b.
Shopping Satisfaction
 5/5
It dose what it says on the tin, so to speak.
Ronald P.
Shopping Satisfaction
 5/5
Very good.
Alessandro T.
Shopping Satisfaction
 5/5
First class correspondence thank you. a wee delay in receiving item but i have just had it delivered...
William b.